기본정보
모델 번호. | 알루미늄스트라이펜 - 페니 |
애플리케이션 | 운송 도구, 문 및 창문, 유리벽, 방열판, 장식 |
인증 | RoHS, ISO9001, ASTM, JIS, GB, EN, ASTMB, SGS, BV |
기술 | 냉간 압연 |
그라드 | 1000er 시리즈 |
기질 | O-H112 |
표면 처리 | 뮐렌피니쉬 |
합금 | 합금 |
두께 | 0,01~600mm |
너비 | 20-2000mm |
표면 | 밀 마감/슈피겔 마감 |
표준 | ASTM-B209. En573-1, GB/T3880.1-2006 |
재산 | 부식 방지, 내열성 |
포장 | 목재 팔레트 수출 |
지불 | 30% Tt 사전 + 70% 조정 잔액 |
최소 주문 수량 | 2톤 |
배달 시간 | 7-15 테이크 |
조사 | 무료로 사용해 보세요 |
운송 패키지 | 표준 수출 포장 |
사양 | 시리즈 1000, 3000, 5000, 6000, 8000 |
기원 | 중국 산둥 |
HS 코드 | 7606119900 |
생산 능력 | 25000 톤/월 |
상품 설명
열 교환기 핀용 Mill Finish 1100 순수 알루미늄 스트립
사양:
제품 | 합금 시리즈 | 두께(mm) | 폭(mm) | 길이(mm) |
알루미늄블크 | 세리 1-8 | 0,3-6 | 50-2250 |
100-11000 mm 또는 코일로 |
알루미늄 코일/스트립 | 세리 1-8 | 0,3-6 | 50-2250/20-800 |
알루미늄텔러 | 3,5,6 시리즈 | 6,0-170 | 50-2250 |
알루미늄 트레드(체크무늬). | 1,3,5 시리즈 | 0,8-6,35 | 50-2250 |
끝/탭 소재에 사용 가능 | 5052/5182 | 0,15-0,3 | 20-1600 |
1) Legierung der Serie 1000 (im Allgemeinen als handelsübliches reines Aluminium bezeichnet, Al>99,0%). |
합금 | 1050 1050A 1060 1070 1100 |
기질 | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194 등 |
사양 | 두께 ≤ 30mm; 폭 ≤ 2600mm; 길이 ≤ 16000mm 또는 코일(C) |
애플리케이션 | 뚜껑창고, 산업설비, 보관소, 각종 용기 등 |
특징 | 뚜껑 전도성이 높고 내식성이 우수하며 융해잠열이 높고 반사율이 높으며 용접성이 우수하고 강도가 낮으며 열처리에 적합하지 않습니다. |
2) 3000계 합금(일반적으로 Al-Mn 합금이라 하며, Mn을 주합금원소로 사용) |
합금 | 3003 3004 3005 3102 3105 |
기질 | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194 등 |
사양 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum refers to rectangular plates/coils processed by rolling aluminum ingots, which are divided into pure aluminum and alloy aluminum. Aluminum alloy is an alloy based on aluminum with a certain amount of other alloying elements added, and is one of the light metal materials. In addition to the general characteristics of aluminum, alloy aluminum also has specific characteristics of some alloys due to the different types and quantities of alloying elements added. Brushed aluminum plate: The manufacturing process of repeatedly scraping the aluminum plate out of the line with sandpaper. The main process of the process is divided into three parts: deesterification, sand mill and water washing. In the aluminum sheet drawing process, the special film technology after anodizing can make a film layer containing the metal component on the surface of the aluminum sheet, and clearly show every fine wire mark, so that the metal matte shines with fine hair. Silky sheen.Aluminum plate: The aluminum plate is formed by placing the aluminum plate in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode, and performing electrolysis under specific conditions and applied current. The aluminum plate of the anode is oxidized, and a thin layer of aluminum oxide is formed on the surface, the thickness of which is 5 to 20 microns, and the hard anodized film can reach 60 to 200 microns.PS aluminum plate (advertisement aluminum plate, also known as printed zinc plate, newspaper plate): that is, an aluminum plate with a printed pattern on the back and a thickness of 025 or 03.Mirror aluminum plate: refers to the aluminum plate that is processed by rolling, grinding and other methods to make the surface of the plate show a mirror effect.Embossed aluminum plate: it is an aluminum product that forms various patterns on the surface after calendering on the basis of aluminum plate. It is widely used, mainly used in packaging, construction, curtain wall and so on. Detailed Photos Packaging & Shipping